TEC PROGRAM DESCRIPTIONS – RESIDENTIAL CUSTOMERS
Site built homes, manufactured homes and multifamily building windows and door replacements with Energy Star Qualified products.
-
Homes must have pre-existing windows that are single pane, single pain with storm windows or double pane with metal frames. New windows must have a National Fenestration Rating Council (NFRC) rated U-value of 0.30 of lower or .22 or lower.
-
New sliding glass doors shall have a NFRC rated U-value of 0.35 or lower or 0.30 or lower.
-
Existing exterior doors must be uninsulated substandard doors.
-
Single Family- The incentives range from $6 to $8 a square foot of windows replaced.
-
Multifamily- The incentives range from $12 to $16 a square foot of windows replaced.
-
The incentive for exterior doors is $40. New doors must be Energy Star rated.
-
Projects must be completed by a qualified window contractor from the list provided. Qualified Contractors List for Window replacements who participate in Tanner's Window rebate programs
For questions or more info call Mike Porter 503-730-3122 or email: mike.porter@evergreen-efficiency.com
Site built homes, manufactured homes and multifamily building are eligible for additional ceiling and floor insulation installed by a licensed and bonded contractor that increases the R Value for the living space.
The incentives depend on the additional insulation added to the existing R Value of the ceiling and/or floor. They start at 6 cents a square foot of insulation installed up to $2 a square foot of insulation installed. A BPA qualified contractor must be used from the list provided below.
Download Qualified Contractors List Download Rebate Application
For questions, application or more info call Mike Porter 503-730-3122 or email: mike.porter@evergreen-efficiency.com
The Ductless Heat Pump program helps reduce residential customers heating costs and improve their homes. Electric heating costs can be reduced by 25% to 50% plus customers receive the added bonus of air conditioning.
-
Homes (site built or manufactured) with electric baseboard, wall heaters, ceiling cable or forced air electric furnaces– Incentive of $800.
Trained Ductless Heat Pump contractors must install the equipment. Qualified Contractors List for Ductless Heat Pump (as listed on Going Ductless web site), who participate in Tanner's rebate programs
For all questions or more info call Mike Porter 503-730-3122 or email: mike.porter@evergreen-efficiency.com
Tanner Electric Cooperative now has three Heat Pump programs for customers who have an existing electric forced air furnace with duct work (considered a Conversion) or have an existing Heat Pump, Oil or Natural Gas Forced Air Furnace (considered a Heat Pump Upgrade) and want lower heating bills in the winter and the comfort of air conditioning in the summer
1. The incentives for this Conversion program Without PTCS Testing and registry are:
Homes (site built or manufactured homes) with ducted forced-air electric furnaces - the Incentive is $800.
- Variable Speed Air Source Heat Pump Conversions Without PTCS:
Homes (site built or manufactured homes) with ducted forced-air electric furnaces – the incentive is $1,000.
2. The incentives for this Conversion program With PTCS Testing and registry are:
- Air Source Heat Pump Conversions With PTCS:
Homes (site built or manufactured homes) with ducted forced-air electric furnaces - the Incentive is $1,400.
- Variable Speed Air Source Heat Pump Conversions With PTCS:
Homes (site built or manufactured homes) with ducted forced-air electric furnaces – the incentive is $1,600.
3. The incentives for this Upgrade program With PTCS Testing and registry are:
- Air Source Heat Pump Upgrade With PTCS:
Homes (site built or manufactured homes) with and existing Heat Pump, Oil or Natural Gas Forced Air Furnace - the Incentive is $500
- Variable Speed Air Source Heat Pump Upgrade With PTCS:
Homes (site built or manufactured homes) with existing Heat Pump, Oil or Natural Gas Forced Air Furnace – the incentive is $700.
Trained Heat Pump contractors install the systems and the qualified equipment must have an AHRI certification.
Download the application For converting electric or non-electric heating systems to Heat Pumps
For all questions or more info call Mike Porter 503-730-3122 or email: mike.porter@evergreen-efficiency.com
Download Application Air Source Heat Pump Conversion Form (Non PTCS)
Download Application Air Source Heat Pump Conversion Form with PTCS electric non-electric
Download Application Air Source Heat Pump Upgrade Form with PTCS
The goal of this program is to help customers reduce their electric water heating costs. Heat Pump Water Heaters can reduce your water heating costs up to 50%.
The incentives to install Heat Pump Water Heaters range from $300 to $700 depending on the size of unit installed and the type of intake and/or exhaust ducts utilized. In addition, several manufactures are offering additional incentives.
HPWHs use electricity to move heat from one place to another instead of generating heat directly, like a refrigerator running in reverse. While a refrigerator pulls heat from its interior and exhausts that heat into the surrounding room, a heat pump water heater pulls heat from the surrounding air and transfers it into the tank to heat the water.
HPWH’s that qualify for the program are Integrated units: also called one-piece, drop-ins, or stand-alones. Some of these heat pump water heaters can be fitted with intake and/or exhaust ducts, according the needs of a particular installation location.
Qualified Contractors List for Heat Pump Water Heaters (as listed on Going Ductless web site), who participate in Tanner's rebate programs. For a list of qualified units, questions, application or more info call Mike Porter 503-730-3122 or email: mike.porter@evergreen-efficiency.com
The goal of this program is to help our members reduce their heating costs and improve comfort levels in their homes.
Site built homes, manufactured homes and multifamily buildings with electric forced-air furnaces, air source heat pumps and ground source heat pumps as their primary heating source are eligible.
The incentive is $140 if purchased from a retail store and SELF INSTALLED or $165 if installed by a CONTRACTOR
Qualifying Thermostats must be listed on BPA’s Smart Thermostat qualified list.
Purchase and submit the Tanner application, receipt of purchase with make and model number and send to Tanner Electric Cooperative.
You will receive the INCENTIVE in the US MAIL in about 4 weeks. For more information about the SMART THERMOSTAT Program, contact Mike Porter, Program Manager at 503-730-3122 or email: mike.porter@evergreen-efficiency.com
Download SMART Thermostat Incentive Application
Other Appliance Rebates Offered Visit the Energy Star website at www.energystar.gov to learn more about conservation appliances.
-
ENERGY STAR Qualified Clothes Washer - $15 to $50 depending on the existing water heater and ENERGY STAR rating for a new washer
-
ENERGY STAR Qualified Clothes Dryer - $50
For more information and qualified products contact Mike Porter, Program Manager at 503-730-3122 or email: mike.porter@evergreen-efficiency.com
Return completed rebate application and Proof of Purchase to: mike.porter@evergreen-efficiency.com or MAIL to: TEC PO Box 1426- North Bend WA 98045
*To qualify for these incentives you must be a current member of Tanner Electric Cooperative. Requests for incentives must be received within 60 days of purchase. Please allow 4 weeks for processing. Please submit a copy of proof of purchase, a product information sheet that includes the ENERGY STAR logo and specifications for our records. These programs are subject to change without notice.
