Skip to main navigation.
Hours M-TH 7:00 am--5:30 pm 425-888-0623 1-800-472-0208

Clean or replace filters on furnaces once a month or as needed.

Use the energy-saving cycle on your dishwasher and only wash full loads.

Report an outage, Pay your bill or Access your daily power usage with the SmartHub App. Download SmartHub for free at iTunes or Google Play Store

 

Residential Energy Efficiency Incentives

 TEC PROGRAM DESCRIPTIONS – RESIDENTIAL CUSTOMERS

 

1. Prime Window and Door Replacement Program

Site built homes, manufactured homes and multifamily building windows and door replacements with Energy Star Qualified products. Projects must be completed by qualified window contractor. 

  • Homes must have pre-existing windows that are single pane, single pain with storm windows or double pane with metal frames. New windows must have a National Fenestration Rating Council (NFRC) rated U-value of 0.30 of lower or .22 or lower.
  • New sliding glass doors shall have a NFRC rated U-value of 0.35 or lower or 0.30 or lower.
  • Existing exterior doors must be uninsulated substandard doors.
  • Single Family- The incentives range from $6 to $8 a square foot of windows replaced.
  • Multifamily- The incentives range from $12 to $16 a square foot of windows replaced.  The incentive for exterior doors is $40. New doors must be Energy Star rated   For questions, application or more info call Mike Porter 503-730-3122 or email: mike.porter@evergreen-efficiency.com   

Qualified Contractors List  for Window replacements (as listed on Going Ductless web site), who participate in Tanner's Window rebate programs

 

 

2. Insulation Program

Site built homes, manufactured homes and multifamily building are eligible for additional ceiling and floor insulation installed by a licensed and bonded contractor that increases the R Value for the living space.

The incentives depend on the additional insulation added to the existing R Value of the ceiling and/or floor. They start at 6 cents a square foot of insulation installed up to $2 a square foot of insulation installed.

 For questions, application or more info call Mike Porter 503-730-3122 or email: mike.porter@evergreen-efficiency.com   

 

3. Ductless Heat Pump Program – for residential customers

The Ductless Heat Pump program helps reduce residential customers heating costs and improve their homes. Electric heating costs can be reduced by 25% to 50% plus customers receive the added bonus of air conditioning.

 

  • Homes (site built or manufactured) with electric baseboard, wall heaters, ceiling cable or forced air electric furnaces– Incentive of $800.

 Trained Ductless Heat Pump contractors must install the equipment.   Qualified Contractors List  for Ductless Heat Pump (as listed on Going Ductless web site), who participate in Tanner's rebate programs

 

       For all questions, application or more info call Mike Porter 503-730-3122  or email mike.porter@evergreen-efficiency.com             

 

 

4. Ducted Heat Pump Program – for residential customers

This Heat Pump program is for customers who have an existing electric forced air furnace with duct work and want lower heating bills in the winter and the comfort of air conditioning in the summer.

The incentives for this program are:                                                        

 

  • Air Source Heat Pump Conversions:

Homes (site built or manufactured homes) with ducted forced air electric furnaces - the Incentive is $800.

 

  • Variable Speed Air Source Heat Pump Conversions:

Homes (site built or manufactured homes) with ducted forced air electric furnaces – the incentive is $1,000.

 

Trained Heat Pump contractors install the systems and the qualified equipment must have an AHRI certification.

 

           For all questions, application or more info call Mike Porter 503-730-3122  or email mike.porter@evergreen-efficiency.com

 

 

5. Heat Pump Water Heater Program

The goal of this program is to help customers reduce their electric water heating costs. Heat Pump Water Heaters can reduce your water heating costs up to 50%.

The incentives to install Heat Pump Water Heaters range from $300 to $600 depending on the size of unit installed and the type of intake and/or exhaust ducts utilized. In addition, several manufactures are offering additional incentives.

 

HPWHs use electricity to move heat from one place to another instead of generating heat directly, like a refrigerator running in reverse. While a refrigerator pulls heat from its interior and exhausts that heat into the surrounding room, a heat pump water heater pulls heat from the surrounding air and transfers it into the tank to heat the water.

HPWH’s that qualify for the program are Integrated units: also called one-piece, drop-ins, or stand-alones. Some of these heat pump water heaters can be fitted with intake and/or exhaust ducts, according the needs of a particular installation location.

Qualified Contractors List  for  Heat Pump Water Heaters (as listed on Going Ductless web site), who participate in Tanner's rebate programs. For a list of qualified units, questions, application or more info call Mike Porter 503-730-3122 or email: mike.porter@evergreen-efficiency.com

 

6. LED Retail Purchase Program

The goal of this program is to help customers reduce their energy bill while improving the light level in their homes. The incentives to purchase ENERGY STAR rated LED lamps from any retail store ranges from $.75 to $4 depending on the LED lamp you purchase.

Simply purchase ENERGY STAR rated LED lamps for your home, install them, complete the Tanner LED Application, send the application to Tanner Electric Cooperative along with a copy of your purchase receipt and a copy of the LED package label showing the lamps are ENERGY STAR rated with make and model number. You will receive the incentive in the US MAIL in about 4 weeks.

 

7. `SMART Thermostat Program

The goal of this program is to help customers reduce their heating costs and improve comfort levels in their homes.

Site built homes, manufactured homes and multifamily buildings with electric forced-air furnaces, air source heat pumps and ground source heat pumps as their primary heating source are eligible.

The incentive is $100 if purchased from a retail store and installed by the end user and $125 if installed by a contractor.

Qualifying Thermostats must be listed on BPA’s Smart Thermostat qualified list.

Purchase and submit the Tanner application, receipt of purchase with make and model number and send to Tanner Electric Cooperative.  

You will receive the INCENTIVE in the US MAIL in about 4 weeks. For more information about  the SMART THERMOSTAT Program, contact Mike Porter, Program Manager at 503-730-3122 or email:mike.porter@evergreen-efficiency.com

Download SMART Thermostat Incentive Application

 

  • ENERGY STAR Qualified Clothes Washer - $15 to $50 depending on existing water heater and ENERGY STAR rating for new washer

Purchase an ENERGY STAR qualified clothes washer Application and Proof of Purchase Required

 

  • ENERGY STAR Qualified Clothes Dryer - $50

Purchase an ENERGY STAR qualified clothes dryer  Application and Proof of Purchase Required

 Application and Proof of Purchase Required. For more information and qualified products contact Mike Porter or email: mike.porter@evergreen-efficiency.com   

 
To qualify for these incentives you must be a current member of Tanner Electric Cooperative. Requests for incentives must be received within 60 days of purchase. Please allow 4 weeks for processing. Please submit a copy of proof of purchase, product information sheet that includes the ENERGY STAR logo and specifications for our records. These programs are subject to change without notice. 
 
 
 

 

 

 

 

 

   
Powered by Touchstone Energy Cooperatives Logo